Shocks Repairs Mt Wellington – Every car, truck, and utility vehicle sold today has at least one shock absorber (informally known as a shock) for each of its wheels. Note that sometimes these shocks are called struts. A strut is simply a shock absorber that is located inside a coil spring, the name is different but the function is the same.
How a shock absorber works
A shock absorber or strut consists of one or more pistons that flow through a thick oil as the wheel to which it’s attached moves up and down. The motion of the piston through the oil converts mechanical energy to heat, damping the motion and helping bring it to a stop; this helps to stop the wheel from bouncing after each bump. The oil and the piston are sealed within a closed container and under normal conditions oil doesn’t get out and none ever needs to be added.
What a shock does not do
Note that a shock absorber doesn’t actually absorb the shock of a bump; that’s the job of the springs and certain other components of the suspension. Rather, the shock absorber absorbs energy. A vehicle without shocks would keep bouncing up and down for a while after every bump; the shock absorbs the energy of the bouncing.
Unfortunately, shocks and struts can break or wear out.
The three things that are most likely to go wrong with a shock are:
- The seals can become brittle or torn, allowing fluid to leak out; after some fluid (about ten percent of the total) is lost the shock loses its ability to absorb energy.
- The entire shock, or the piston that moves inside it, can be bent from an impact; a bent shock may not move properly or it may leak.
- Smaller parts inside the shock may wear out over time or due to an impact.
These problems are almost always due to one of two things: age and accidents.
Modern shock absorbers and struts are designed to last several years and over 80,000 kilometers, but eventually the seals do wear out and they begin to leak. Your owner’s manual may specify a time or mileage for shock replacement, but this is a guideline, not an absolute: driving style, road conditions, and even how much dirt the shock encounters can have an effect.
Any accident that involves the suspension has the potential to damage the shock absorbers; a bent or dented shock almost always needs to be replaced. After a major accident the repair shop will examine your shocks to see whether they need replacement, but it’s important to understand that for this purpose, “accident” includes not just serious crashes but also anything that jars the suspension particularly hard, including hitting curbs, large rocks, and deep potholes, or even a rock being kicked up against the shock as you drive on a dirt road.
Drive in today!
When any of these things goes wrong it’s almost always necessary to replace the shocks, as they usually can’t be repaired or simply refilled. Also, it’s important to replace a failing shock as soon as possible, because a car with a bad shock absorber can become difficult to control in an emergency due to excessive wheel bounce.
Drive in to discuss it or give us a call on 09 570 8959